Freebsd game server

MySql Contains Podman January 11, Install a Redis server on Debian 11 January 11, This is the second article of a series focused in Gnu Bash scripting. On the first bash scripting article we've just created the most This is the first article of a series focused in Gnu Bash scripting.

It's not a complete course on bash programing, but at the Still working with gnome boxes Linux Gonzalo Rivero - December 29, 1. A couple of weeks ago, I've wrote an article about how I'm kinda in love with gnome boxes. Well, I'm still working with gnome About Us. Popular Category. It is important to note that configtest is not an rc 8 standard, and should not be expected to work for all startup scripts. Virtual hosting allows multiple websites to run on one Apache server.

The virtual hosts can be IP-based or name-based. IP-based virtual hosting uses a different IP address for each website. To setup Apache to use name-based virtual hosting, add a VirtualHost block for each website. For example, for the webserver named www. For each virtual host, replace the values for ServerName and DocumentRoot with the values to be used. Apache uses modules to augment the functionality provided by the basic server.

If the module is not compiled with the port, the FreeBSD Ports Collection provides an easy way to install many modules. This section describes three of the most commonly used modules. This is no longer the case and the default install of Apache comes with SSL built into the web server. An example of how to enable support for SSL websites is available in the installed file, httpd-ssl.

It is recommended that both files be evaluated to properly set up secure websites in the Apache web server. After the configuration of SSL is complete, the following line must be uncommented in the main http. SSL version two and version three have known vulnerability issues.

It is highly recommended TLS version 1. This can be accomplished by setting the following options in the ssl. To complete the configuration of SSL in the web server, uncomment the following line to ensure that the configuration will be pulled into Apache during restart or reload:. The following lines must also be uncommented in the httpd. The next step is to work with a certificate authority to have the appropriate certificates installed on the system.

This will set up a chain of trust for the site and prevent any warnings of self-signed certificates. In addition, the persistent interpreter embedded in the server avoids the overhead of starting an external interpreter and the penalty of Perl start-up time. Support for PHP for Apache and any other feature written in the language, can be added by installing the appropriate port. A list will be displayed including the versions and additional features they provide.

The components are completely modular, meaning features are enabled by installing the appropriate port. To install PHP version 7. By default, PHP will not be enabled. In addition, the DirectoryIndex in the configuration file will also need to be updated and Apache will either need to be restarted or reloaded for the changes to take effect.

Support for many of the PHP features may also be installed by using pkg. As before, the Apache configuration will need to be reloaded for the changes to take effect, even in cases where it was just a module install. Once the install is complete, there are two methods of obtaining the installed PHP support modules and the environmental information of the build. The first is to install the full PHP binary and running the command to gain the information:.

It is necessary to pass the output to a pager, such as the more or less to easier digest the amount of output. At the time of install, this file will not exist because there are two versions to choose from, one is php. These are starting points to assist administrators in their deployment. Apache support for the HTTP2 protocol is included by default when installing the port with pkg. The new version of HTTP includes many improvements over the previous version, including utilizing a single connection to a website, reducing overall roundtrips of TCP connections.

Also, packet header data is compressed and HTTP2 requires encryption by default. While this change does require administrators to make changes, they are positive and equate to a more secure Internet for everyone. This configuration depends on the previous sections, including TLS support.

It is recommended those instructions be followed before continuing with this configuration. It exists to deliver security and bug fixes quicker than the module installed with the bundled apache24 port. It is not required for HTTP2 support but is available. Having the h2c here will allow plaintext HTTP2 data to pass on the system but is not recommended. Reload the configuration using the apachectl reload command and test the configuration either by using either of the following methods after visiting one of the hosted pages:.

These include Django and Ruby on Rails. Django is a BSD-licensed framework designed to allow developers to write high performance, elegant web applications quickly. It provides an object-relational mapper so that data types are developed as Python objects.

It also provides an extensible template system so that the logic of the application is separated from the HTML presentation. Once Django is installed, the application will need a project directory along with the Apache configuration in order to use the embedded Python interpreter.

This interpreter is used to call the application for specific URLs on the site. To configure Apache to pass requests for certain URLs to the web application, add the following to httpd. Ruby on Rails is another open source web framework that provides a full development stack.

It is optimized to make web developers more productive and capable of writing powerful applications quickly. This section summarizes these files. Refer to ftpd 8 for more details about the built-in FTP server. The most important configuration step is deciding which accounts will be allowed access to the FTP server.

By default, it includes system accounts. Additional users that should not be allowed access to FTP can be added. In some cases it may be desirable to restrict the access of some users without preventing them completely from using FTP. This file lists users and groups subject to FTP access restrictions. Users will then be able to log on to the FTP server with a username of ftp or anonymous.

When prompted for the password, any input will be accepted, but by convention, an email address should be used as the password. The FTP server will call chroot 2 when an anonymous user logs in, to restrict access to only the home directory of the ftp user.

There are two text files that can be created to specify welcome messages to be displayed to FTP clients. The ftpd daemon uses syslog 3 to log messages. Be aware of the potential problems involved with running an anonymous FTP server. In particular, think twice about allowing anonymous users to upload files. It may turn out that the FTP site becomes a forum for the trade of unlicensed commercial software or worse.

If anonymous FTP uploads are required, then verify the permissions so that these files cannot be read by other anonymous users until they have been reviewed by an administrator.

The protocol allows clients to access shared data and printers. These shares can be mapped as a local disk drive and shared printers can be used as if they were local printers.

This file must be created before Samba can be used. A simple smb4. For more complex setups involving LDAP or Active Directory, it is easier to use samba-tool 8 to create the initial smb4. The string that will be displayed in the output of net view and some other networking tools that seek to display descriptive text about the server.

Do not enable support for WINS on more than one server on the network. These directives control the options:. If the clients use usernames that are the same as their usernames on the FreeBSD machine, user level security should be used. This is the default security policy and it requires clients to first log on before they can access shared resources. In share level security, clients do not need to log onto the server with a valid username and password before attempting to connect to a shared resource.

This was the default security model for older versions of Samba. Samba has several different backend authentication models.

The recommended authentication method, tdbsam , is ideal for simple networks and is covered here. For larger or more complex networks, ldapsam is recommended. Map existing FreeBSD user accounts using pdbedit 8 :. This section has only mentioned the most commonly used settings. Refer to the Official Samba Wiki for additional information about the available configuration options. Samba consists of three separate daemons.

If winbind name resolution is also required, set:. This is problematic as many network services require the computers on a network to share the same accurate time. Accurate time is also needed to ensure that file timestamps stay consistent. FreeBSD includes ntpd 8 which can be configured to query other NTP servers to synchronize the clock on that machine or to provide time services to other computers in the network.

This section describes how to configure ntpd on FreeBSD. Ntpd is configured using rc. Ntpd communicates with its network peers using UDP packets. Choosing several NTP servers is recommended in case one of the servers becomes unreachable or its clock proves unreliable. As ntpd receives responses, it favors reliable servers over the less reliable ones. The servers which are queried can be local to the network, provided by an ISP, or selected from an online list of publicly accessible NTP servers.

When choosing a public NTP server, select one that is geographically close and review its usage policy. The pool configuration keyword selects one or more servers from a pool of servers. An online list of publicly accessible NTP pools is available, organized by geographic area. In addition, FreeBSD provides a project-sponsored pool, 0. This is a simple example of an ntp. It can safely be used as-is; it contains the recommended restrict options for operation on a publicly-accessible network connection.

The format of this file is described in ntp. The descriptions below provide a quick overview of just the keywords used in the sample file above. By default, an NTP server is accessible to any network host.

The restrict keyword controls which systems can access the server. Multiple restrict entries are supported, each one refining the restrictions given in previous statements. The values shown in the example grant the local system full query and control access, while allowing remote systems only the ability to query the time. For more details, refer to the Access Control Support subsection of ntp.

The server keyword specifies a single server to query. The file can contain multiple server keywords, with one server listed on each line. The pool keyword specifies a pool of servers. Ntpd will add one or more servers from this pool as needed to reach the number of peers specified using the tos minclock value.

The iburst keyword directs ntpd to perform a burst of eight quick packet exchanges with a server when contact is first established, to help quickly synchronize system time. The leapfile keyword specifies the location of a file containing information about leap seconds.

The file is updated automatically by periodic 8. The rc. Normally ntpd will log an error message and exit if the clock is off by more than seconds. This option is especially useful on systems without a battery-backed realtime clock. Ntpd on FreeBSD can start and run as an unpriveleged user. To avoid problems with file and directory access, the startup script will not automatically start ntpd as ntpd when the configuration contains any file-related options. The presence of any of the following keywords in ntp.

Ensure that the ntpd user has access to all the files and directories specified in the configuration. However, if a PPP connection is configured to dial out on demand, NTP traffic should be prevented from triggering a dial out or keeping the connection alive. For example:. Some Internet access providers block low-numbered ports, preventing NTP from functioning since replies never reach the machine.

In iSCSI terminology, the system that shares the storage is known as the target. The storage can be a physical disk, or an area representing multiple disks or a portion of a physical disk.

The clients which access the iSCSI storage are called initiators. This section describes how to configure a FreeBSD system as a target or an initiator. Refer to ctl. The first entry defines the pg0 portal group. Portal groups define which network addresses the ctld 8 daemon will listen on.

The discovery-auth-group no-authentication entry indicates that any initiator is allowed to perform iSCSI target discovery without authentication.

Lines three and four configure ctld 8 to listen on all IPv4 listen 0. It is not necessary to define a portal group as there is a built-in portal group called default. In this case, the difference between default and pg0 is that with default , target discovery is always denied, while with pg0 , it is always allowed.

The second entry defines a single target. This example uses the latter meaning, where iqn. This target name is suitable for testing purposes. For actual use, change com. The represents the year and month of acquiring control of that domain name, and target0 can be any value. Any number of targets can be defined in this configuration file.

The auth-group no-authentication line allows all initiators to connect to the specified target and portal-group pg0 makes the target reachable through the pg0 portal group. The next section defines the LUN. To the initiator, each LUN will be visible as a separate disk device. Multiple LUNs can be defined for each target. That path must exist before starting ctld 8.

The second line is optional and specifies the size of the LUN. To start ctld 8 now, run this command:. If this file is edited after the daemon starts, use this command so that the changes take effect immediately:.

The previous example is inherently insecure as it uses no authentication, granting anyone full access to all targets. To require a username and password to access targets, modify the configuration as follows:. The auth-group section defines username and password pairs. Also, the Playstation 4 is coming out. I hear that's a good dedicated game server running FreeBSD. LordInateur Member Reaction score: 10 Messages: The machines are as follows: - crafthead - crafthub - craftquest - craftdev The machine "crafthead" runs on approximately 3.

In the foreground it runs Lilypad which connects the other three together and screen which allows me to SSH into the shell and disconnect without losing work. The other three machines run on about 3. They are identical in their software configuration.

Each Minecraft server works together so that each acts as a "world" on that server to provide a seamless user experience. I see there are a bunch of Quake ports available. FYI if anyone is interested. Last edited: Nov 19, Click to expand SirDice Administrator Staff member. You could install teamspeak in a jail. You don't need virtualbox. Terydan Member. Joined Jan 19, Messages Thanks again for the responses! Similar threads. Replies 2 Views 2K. Sep 12, kevanbrown. Replies 7 Views Replies 11 Views 10K.

Jan 16, Palle Replies 19 Views 3K. Feb 6, kriegalex. D-Tijori Jun 16, Jails and bhyve. Replies 4 Views 2K.