If you want to avoid this behaviour and install under an unprivileged account just for your own usage, run setup with the --no-admin option. Tip: if you don't want to also upgrade existing packages, select 'Keep' at the top-right of the package chooser page.
A: Yes and no. The setup program understands command-line arguments which allow you to control its behavior and choose individual packages to install. While this provides some functionality similar to such tools as apt-get or yum it is not as full-featured as those package managers. The Cygwin Package Contributor's Guide.
Uploading packages to cygwin. Maintainer git repositories for cygwin packaging. Packaging technical details. How to install Cygwin for hacking and securityPackages to install: Archive - zip Base - tar- gzip Devl - binutils - gcc-core- gcc-g- make- nasm. You can simply delete the whole Cygwin dir. When in the dialog to choose what programs to install, simply accept the default. Once you done installation of the base packages, you can come back to it and install other packages you need. If this is your first time, i highly recommend you follow this.
The above should be smooth. When finished, you can test run Cygwin by clicking the icon on desktop, and the Cygwin terminal should come up. That means bash is running, and you've installed Cygwin successfully.
Now, find out what other programs you need. For example, Cygwin does not install ssh by default. Let's say you want to install ssh. Podcast Making Agile work for data science. Stack Gives Back Featured on Meta. New post summary designs on greatest hits now, everywhere else eventually. Linked 8. Related Hot Network Questions. Question feed. Stack Overflow works best with JavaScript enabled. You can re-submit your package again at a later time, if you choose to do so.
Mention the link to the distribution page where package is maintained. Publishing: In case you're running Apache web server and world known IP address, you can publish your files to the world directly. Add this line to your httpd. Check that your connection can see the files with lynx 1. As a finishing touch, there is command command [publish] which copies ready source package, binary package and setup.
You don't want the second alias presented below to be stored in permanent places, because it contains your GPG identification details. Assuming there already unpacked original package, which has been tested to build correctly, it's a simple matter of making GPG signed releases.
Maybe it had typos. Or setup. Look closely at the results of check command. If anything needs to be edited or corrected, repeat the command after edit. Verify the installation:. If all looks good, the signed packages can be made.
If you don't have gpg installed, then substitute plain "b" instead of for "bb" below:. In case there is permanent Internet connection where files can be put to a publish area Apache, Ftp , the last step copies packages elsewhere on local disk:. The location can be changed if any of the files contains tag cyginstdir: to point to new location.
The following list of scripts is alphabetically ordered. The name of the script indicates when it is run or which command runs it. If this file exists, it is sourced to read custom flags and other make 1 options.
The content of the file should be like this. These are the default values. And they are used in a call to initialize make 1 variables in call like this:. Perhaps simple make all did not compile the package. Perhaps make clean does not handle things gracefully. See also distclean. If this file exists, it is sourced to read custom environment settings just before. For example to use ccache gcc with autotool packages these with configure. After put this line to the file. Notice that there is no path in front of compiler.
If this file exists, all options in this file are appended to the default Cygwin options set during call to. Comments may be added to preceding lines with a hash-mark. In case the package does not include a standard GNU. If there is nothing to configure, leave this script out. For the custom program:. To start with the custom script, here are the standard Cygwin configure switches, which you can incorporate:.
By default the [patch] command excludes files that it thinks do not belong there, but in many case package generate other extra files that should be excluded too. In this file it is possible to supply extra options to diff 1 while comparing the original source directory against the current package directory. The options to diff must be listed one line at a time.
Comments can start with hash-character. There a re couple of options that affect cygbuild itself. If following option is found, then no automatic guessing what files might have been auto-generated, is done.
This is effectively a pseudo option that says "turn off internal check":. Warning: due to shell expansions in the program, it is not possible to use wildcards with short option names, like this:. When the original source has been unpacked, it may include files that prevent taking clean diff. IT could happen that the source package mistakenly included compiled object files or included dangling symlinks to the original authors files.
This is the chance to "straighten up" things before diff engages. Sometimes the default [mkpatch] command - which runs diff 1 with conservative set of options - is not enough. The custom program is called with three arguments:. Program should not change any of these parameters, but only adjust only diff 1 options.
Program must return standard shell status 0 on success and non-zero on failure. An example is presented below.
Perhaps make distclean does not handle things gracefully. See also clean. List install 1 compatible entries in separate lines. The format is:. If destination contains a trailing slash, the src is installed to that directory.
If there is no trailing slash, the last element is used for filename. The third parameter is optional mode argument passed to install -m MODE. Notice that the destination does not contains starting slash. Common script suffixes like. In addition all components of destination is also removed.
This allows making suitable "mirrors" of configuration directories. Below, first the prefix componen underlined is removed, the the matches destination componen fromt he left:.
In case the first word is ln , the line is interpreted as a symbolic link instruction effectively interpreted as follows The DESTDIR part is always mandatory in orer to be able to cd to correct location.
This script is for binary packaging commands [package] and [package-devel]. If a Makefile run by make install includes hard coded paths or uses cp 1 to copy files, to absolute locations, a custom installation procedure may be needed.
It would also help if the author of the original package were contacted and suggested that a possible new releases of package would lean to use install 1 and Makefile variables. Those could be set externally and controllable manner. Examine the Makefile and its installation rules and write a script to mimic same steps. When custom script is called:. When the final binary package is installed by some user, it must not unintentionally overwrite anything that is already in the system.
NOTE: Instead of this file, it would be much better to gets hands dirty and modify directly the original Makefile. Even if that meant writing the whole installation from scratch. If this file exists, it is called after cygbuild has run its standard installation steps.
The format of the file is the same as in install. This script is for binary packages commands [package] and [package-devel]. If this script exists, it is called after cygbuild has run its standard installation steps. Sometimes there is no need to write full custom install. For example, suppose that after packages "make install" the directory structure would look like this listing has been condensed :. Does everything look good? Documentation appears to be installed twice.
In this case it is due to fact that cybuild. But if run "make install" also does the same, it's a problem as in this case. The target directory was just a little different. The [install] csommand runs series of install phases. If you need to set any environment variables or arrange other things, do it in this file. It will be called like. If you need exotic 'make install' options, this is the place to configure. The [install] command runs series of install phases.
In this file it is possible to supply extra tar options to exclude more files not to be included. The format of file is presented below.
0コメント